Pinhole Leak in Copper Pipes and The Damage They Can Cause

Causes of Pitting Corrosion

According to the Task Force’s research, pitting corrosion occurs for one of three primary reasons:

1. Chemical or mechanical damage to the protective oxide film that coats copper pipe.
2. Localized damage to or poor application of protective coating.
3. The presence of non-uniformities in the metal structure of the component, e.g. nonmetallic inclusions.

Any of these three inciting conditions could cause your pinhole leak in copper pipe in the following ways:

Chemical damage

This is the most likely cause of your pinhole leak. Your home water’s pH value has little to no bearing on your water’s quality or safety, but it will affect your pipes. In its own investigation of pinhole leak in copper pipe, the city of Folsom found four different ways water’s pH value could interact with its sulfate content, temperature, bacteria, and/or piping metal to produce the conditions for copper pitting.

Should any of these conditions occur in your pipes, then the chemical reaction will eat away at the protective oxide coating insulating the inner pipe’s metal from the water running through them. When this coating wears away completely in small places, then that small portion of the pipe is highly vulnerable to corrosion – hence, a pinhole leak forms.

Mechanical damage

Physical contaminants such as sediment or heavy metals present in the water supply may wear away at the inside of your pipes as they pass through. This could occur if your water is particularly hard or only locally treated (if it’s well water, for instance). Abnormally high water pressure may also scrape away the oxide coating of copper piping over time.

Localized damage or poor application of protective coating

It is unlikely but not impossible that your copper pipes are either of a poor quality or were improperly installed. This is more likely if your pipes were retrofitted and/or installed unprofessionally. Damaged copper pipes may not possess the same resistance to corrosion as they should, which can lead to pinhole leaking and other problems.

Non-uniformities in the metal structure

This is particularly likely if your pipes were only partially retrofitted into your home, ie: if your home uses both copper pipes and another type of metal for either piping or connective joints. When two different metals interact, especially in a solvent like water, the resulting tension can wear away at both. In the case of copper pipes, this tension will wear away at the oxide coating inside your pipes, eventually leading to pinhole leaks.

Signs you have a pinhole leak in your copper pipes

Tiny leaks in copper pipes can be difficult to locate, especially if they’re underneath counters or behind walls. If you suspect you may have a pinhole leak in your copper plumbing, look for any of the following signs:

• Higher water bill: All leaks will raise your water bill, no matter how small
• Lower water pressure: Pressure leaks out of pinhole leaks just like water does, which will result in lower water pressure throughout your home
• Dripping sounds: Try to follow the sound to the leak itself, if possible
• Water damage: Especially under or around your pipes
• Mold or mildew growth: Especially near your pipes
• Condensation on your pipes: The outside of your pipes should never feel moist or wet
• Pipe discoloration: If your copper pipes ever look too brown, green, or blue, then it means they’re partially oxidizing

The best way to look for water pipe leaks is to turn off your water and check your water meter. If you’re sure you’ve turned off the supply but the water meter is still moving, then you have a leak somewhere. If you have copper piping and a leak, then it stands to reason you may have a pinhole leak.

How not to fix pinhole leak in copper pipe

Before we teach you how to fix your pinhole leaks, it’s important you learn what not to do. This is because there’s a lot of bad copper pipe repair advice out there. Not only are most of the DIY fixes you can read about ineffective, but in many cases they’ll create new problems.

For instance, you shouldn’t use either pipe repair clamps or replacement pipes affixed with couplings. Pipe repair clamps are fundamentally a temporary solution. They may even introduce chemical and metal alterations to your water, which can further wear away at the pipe. Likewise, couplings and replacement pipes negatively interact with the copper in your pipes. This can create the tension that wears away at the oxide coating referred to above. By applying either of these methods to your pinhole leak, you might create a big problem by trying to solve a little one!

How to fix a copper pipe pinhole leak

The only truly effective way to fix pinhole leaks in copper pipes is via the “sweating” replacement method. While you can find everything you need to attempt sweat coupling yourself at hardware stores, we generally don’t recommend homeowners try it themselves because it involves soldering and requires significant experience. If you want to attempt sweat soldering a copper pipe leak yourself, or if you’re just curious how it works, here is an overview:

NOTE: sweating pipe replacements are only recommended if you have to repair ½” of copper pipe or less. If the replacement job proves to require more significant replacement, you should call a professional.

Tools required:

• Tube cutter
• Cotton rags
• Measuring tape
• Sweat coupling replacement pipe
• ¾” diameter wire fitting brush
• Solder wire
• Propane torch

Steps:

1. Locate and mark the leak on your pipe.
2. Turn off the water main! (this is important!)
3. Drain the water from the pipe.
4. Cut up to ½” of damaged section and surrounding pipe out using the tube cutter.
5. Dry the new openings created by cutting away the damaged section. Stuff each side with the cotton rags to keep them from getting wet again. Only remove these cotton rags right before you solder.
6. Measure the gap created by removing the damaged section.
7. Measure and cut a replacement section of sweat coupling replacement pipe that’s 1” longer than the gap’s measurement.
8. Smooth the rough edges of the replacement pipe with the cutter.
9. Smooth the rough inner edges of the pipe with the wire fitting brush.
10. Clean and smooth the cut sections of attached pipe, as you did with the replacement section.
11. Slide the sweat coupling replacement pipe over each end of the remaining pipes. Make sure about ½” of the replacement pipe fits over the old section on either side.
12. Solder the new joint by holding the torch to one side and the tip of the solder wire to the other until enough of the wire melts into the opening to completely fill it.
13. Turn on the water and test the repair.

How to prevent pinhole leaks in copper pipes

With a little investment and diligence, you can prevent the problems that create a pinhole leak in the copper pipe listed above. Here’s how to make sure each one doesn’t give you grief:

Chemical damage

The chemical interactions that wear away at copper pipes typically occur because of high pH value in your water. Investing in a water softener can help prevent the kind of pH values that will harm your copper pipes. If you already have a water softener, make sure it’s functioning correctly and adjust it as needed.

Mechanical damage

A water softener will remove many of the contaminants that could scrape up your copper pipes over time.

Water softeners won’t affect your water pressure, however. If your water pressure seems abnormally high, you may have to take other measures. Check the pressure meter on your water main. It should be between 40-60 PSI. If it is higher, then you should ask your municipal water supplier why. If they can’t determine a cause, invest in a water pressure limiter to keep high pressure from hurting your pipes. A plumber from Cass Plumbing can help manage water pressure problems in your home.

Localized damage or poor application of protective coating

If your pipes were improperly installed or are poor quality, then we highly recommend replacing them as soon as possible. A professional plumbing inspection can tell you if you need to replace your pipes or if less major fixes are possible.

Non-uniformities in the metal structure

It may be possible to replace outdated joints, fittings, or old segments of pipe used throughout your home. We recommend a professional plumbing inspection to determine where the problematic pipe material is and what you should do about it.

Copper Pipe Repair in Tampa

Pinhole leaks are a frustratingly common problem for homeowners throughout the Tampa Bay region. Fortunately, it’s fairly easy to fix a pinhole leak in a copper pipe. If you have a copper pipe leaking in your home, call Cass Plumbing for fast and professional pipe repair service.